太陽能陣列I-V示蹤器系統提供快速和容易的光伏太陽能陣列輸出測量現場。該系統是一個易于使用的工具，用于測量和表征太陽能陣列輸出。安裝程序現在可以驗證陣列效率，并向客戶提供確認系統輸出的數據。這個緊湊的測試系統包括測試儀器，一個日射強度計和溫度傳感器。當使用帶有太陽輻射計和兩個熱電偶的測試儀時，系統將校正太陽光中的缺陷，并提供陣列到陣列性能的比較，而不考慮太陽光。這種設置以非常低的成本提供類似于昂貴的全室內面板測試系統的結果。

太陽能陣列檢查器讀出

OAI太陽能陣列I-V示蹤器系統在實時和在主要的溫度和條件下表征太陽能光伏陣列的功率。小而輕的系統記錄測試數據，溫度，日期和與每個測試相關的標識號 - 所有通過按下一個按鈕。數據端口通過USB接口方便地連接到任何PC，并且具有400個報告的存儲容量。室外面板和陣列I-V示蹤器系統配有一個交流適配器，或者它可以使用AA堿性電池操作完全便攜。該系統是完美的單晶硅或多晶硅光伏電池模塊。型號適用于1.2kW / 120V DC; 3.5kW / 500V DC;和6.0kW / 600V DC。

獨特的功能

·所有測量一次性執行

·體積小，重量輕（W360mm D250mm H125mm 5Kg包括所有電纜）

·用識別號記錄數據以識別測量地點

·用溫度，日射強度，日期和時間記錄數據。

·可存儲400個記錄存儲

·200次自動連續測量

·具有診斷功能和記錄。

·電池操作2小時

·通過USB I / F可以與PC復制記錄數據

模型適合每一個需要

TSC-PD01 TSC-PD02 TSC-PD03 TSC-PD04

最大功率3.5kW 1.2kW 6.0kW 500W

最大電壓DC500V DC120V DC600V DC500V

最大電流10A 350V

7A 500V 10A 10A 1A

傳感器1用于PV電池模塊的連接器

2溫度傳感器

1輻照度計

PC接口1 USB端口

可記錄數據日期和時間，ID號，填充因子（FF），開路電壓（Voc），短路電流（Isc）功率（Pm），最大。工作電流（1pm），最大。工作電壓（Vpm，Sp; ar輻射（PYRA），溫度（外部和模塊），I-V數據（116點）

可記錄數量400數據

The Solar Array I–V Tracer System provides fast and easy PV solar array output measurement on site. The system is an easy-to-use tool for measuring and characterizing solar array output. Installers may now verify array efficiency and supply customers with data that confirms system output. This compact test system includes the test instrument, a pyranometer and temperature sensor. When using the tester with the pyranometer and two thermocouples, the system will correct for deficiencies in sunlight and provide a comparison of array-to-array performance regardless of the sunlight. This setup provides results similar to expensive full indoor panel testing systems at very low costs.

Solar Array Checker Read Out

The OAI Solar Array I–V Tracer System characteristics the power of the solar PV arrays in real time and under prevailing temperature and conditions. The small, lightweight system records test data, temperature, date and an identification number associated with each test — all by pressing a single button. Data ports easily to any PC via the USB interface and has a storage capacity of 400 reports. The Outdoor Panel & Array I–V Tracer System comes complete with an AC adapter or it may be operated using AA alkaline batteries for complete portability. The system is perfect for either monocrystalline silicon or polycrystalline silicon PV cell modules. Models are available for 1.2kW / 120V DC; 3.5kW / 500V DC; and 6.0kW / 600V DC.

Unique Features

· All measurement execute in one push

· Small, light weight (W360mm D250mm H125mm 5Kg including all cables.)

· Record data with Identification Number to identify measurement place

· Record data with Temperatures, Pyranometer, date and time.

· Capable of 400 records storage

· Capable of 200 times automatic continuous measuremnt

· Self diagnostic functions and records.

· Battery operation in 2 hours

· Capable to copy recorded data with PC via USB I/F

Models To Fit Every Need